Utilizing an engineering principle known as in-elastic collision, Bullet
Bunker not only stops projectiles, but also traps their by-products from
entering into the air and ground.
The Bullet Bunker bullet trap, consists of a specially designed face of
rubber with layers of ballistic fabric laminated within the rubber. The
ballistic fabric is a polyester-nylon blend that is similar to product
used in bullet-proof vests. Behind this sheet is a specifically
engineered ballistic medium. The medium is loaded into a steel box
behind the face. Bullets begin deceleration by going through the face of
the Bullet Bunker, then hit all of the pieces of medium in the box at
different angles, stopping it quickly.
Bullet Bunkerís face is self-sealing.
Thousands of rounds have been shot through our test units and there is
still not a visible hole. If / when the face should show signs of wear
it can be replaced in about 15 minutes.
To clean the bullets out of the Bullet Bunker, simply remove a few bolts
and open the front face. It's that easy!